Paul, The "103" in that R-Pak says that it is a 10k unit - if the number of pins is correct, it is the right one. The microphone configuration header is a dual-row header (having pins) that indeed mounts on the back side of the front panel board. It has two rows of 8 pins each.
73, Don W3FPR On 12/12/2010 3:46 PM, Paul Agoglia wrote: > These two components might be here, but I can not identify them. > > RP3, 10k resistor network. By process of elimination of resistor packs in > the kit, I have a resistor pack with a number L836103 Y43 on it. That > number does not match up with the part number listed, or its alternative part > number. It is red in color and has eight pins. > Could this be RP3? > > The other component I can not locate is P1. IT is a microphone configuration > connector. There is no picture of it and the location for it on the back > side of the Front Panel board is not much help. Looks like there are four > holes in the circuit board, but I could not find anything in the KSB2 kit > that had four pins, unless it is in the small paper envelop, where I have not > yet looked. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
