I have version 4.22 firmware. The transition from SUB off to SUB on, and reverse, happens without any dropout. What you describe simply does not happen.
When I use N1MM, ***N1MM*** has some kind of transition issue like that. But it does NOT happen from the K3 front panel. Also sending SB0; or SB1; from the command tester tab of the current K3 utility (not involved with any third party software) produces an instant change. This is very easy to test and verify. What is your firmware version? Does this drop-out occur in the context of using a logging program? If so, what program and version? 73, Guy On Mon, Dec 13, 2010 at 9:55 PM, Tony Estep <[email protected]> wrote: > On Mon, Dec 13, 2010 at 7:32 PM, Luis V. Romero <[email protected]> wrote: > >> ...that annoying momentary dropout in the audio... > > > The momentary dropout that bugs me is the one that occurs when you turn on > Sub. As everybody knows, listening to the DX on VFO A and the pileup on VFO > B is the key to working a lot of DX with modest power and a wire. The K3 is > the best at this in many ways, but it has the unfortunate habit of > observing a moment of silence when the Sub button is pushed. I like to turn > Sub off at times to get rid of the 3db splitter loss, and every time I turn > it back on to check the pile the radio exhibits this annoying trait. Can > this be fixed in firmware someday? > > 73 Tony KT0NY > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
