When using digital modes (excepting CW) I run my K3/100 with a SignaLink USB. Normally I don't use digital modes on 6 or 2 (I have a K144XV installed), but recently I installed the WSJT 9 Suite and noticed the following peculiarity -- on 6 meters only -- which is also audible through the speaker. There is considerably less audio on 6 meters for a given set of front-panel settings than on all the other bands.
I normally run LINE OUT = 08, but on 6 meters, to the WSJT 9.02 suite, to get the ~0 dB reading I have to run LINE OUT around 30-35. On 2 meters the LINE OUT setting is the usual LINE OUT = 08. This is not a problem, but it does have me a bit puzzled. Any suggestions out there? I have doubtless overlooked some CONFIG setting? John Ragle -- W1ZI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
