Gary, Looks like you already made your mind. If you can afford it, for the activities you describe I would suggest second receiver regardless if you have receive antennas or not. During contests I find myself calling CQ on one frequency and listening on both the CQ frequency and frequency of the second receiver on the same band with the same antenna (left ear main, right ear sub). If I find station on second receiver that I want to work, literally by pressing one button I am in position of calling the other station, then another button returns me back to my CQ frequency. When run rate is low, this helps to fill the void. I probably don't need to mention how second receiver helps in rear DX pileup - such a big help! Of course, second receiver and couple CW filters for it will set you back for about $1k - something to think about:-). 73, Igor, N1YX
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Gary K9GS Sent: Sunday, December 26, 2010 2:10 PM To: 'Elecraft' Subject: [Elecraft] Reason to NOT buy a K3? Hello all and Happy Holidays! I've been reading the K3 reflector for the past couple of weeks. I'm in the market for a new radio and have my choices narrowed down to a couple models to replace my TS-850S which has served me very well. First my operating interests: I primarily spend my time contesting, DX contests in particular, and most of my time on 80 and 40M. 99% of the time I operate CW. So, in particular, low band CW performance is important to me. In between contests I spend my time DXing, again primarily on the low bands. Some occasional VHF operating on 6 and 2M. I'd also like to point out that I do interface my radios to a dedicated computer using Win XP pro and use N1MM for contesting and Logger 32 for general operating. Both of these applications are very well supported and the K3 is well represented among users. I've narrowed my choices down to two radios, the FTDX5000 and the K3. There are several things keeping me from falling in love with the FTDX5000: 1) The CW break-in performance is broken in the FTDX5K above ~30 wpm, resulting in chopped characters, and from what I'm told, really bad sounding on the air. 2) The APF filter is also not working correctly. 3) The contour control does not function on CW, I believe only on SSB. Of course, these limitations COULD be fixed by Yaesu in future revisions but I'm apprehensive that Yaesu is going to fix anything. They certainly don't participate in the FTDX5000 user forums although supposedly they do read the posts. Sort of the "we know what we're doing, there's no problem" attitude with JA radio manufacturers. After all, how many FT-1000XX radios were built with the key click problem? I don't think Yaesu ever admitted there was an issue and the fix was relatively simple to implement in production. At $5K plus one would hope these problems are addressed but one never knows. Certainly Elecraft is much more responsive and is actively involved in post sale issues and solutions. I've never been a fan of ICOM HF radios although the IC-7800 gets good reviews but at $10K per radio??? I've also used Ten-Tec before and never been a big fan plus the Orion II suffers from a poor performing 2nd receiver and I know of several locals that have had there Orions back for service/updates several times. So what else is there and am I missing anything else? Which brings me to the K3. This radio seems, to me, to be exactly what I'm looking for. I really can't think of anything holding me back. I'm looking at the 100W model with the following accessories: a) KAT3 b) KXV3A c) 2.8K 8 pole SSB filter d) 400 hz 8 pole filter e) 250 hz 8 pole filter Future options would be the KRX sub receiver, K144XV-K 2M Module (I do some VHF operating but presently have a rig for 2M SSB anyway), I'm not currently using any receive antennas on 80/40M. I'd like an opinion on this but I don't think I see the advantage to buying the sub receiver UNTIL I have receive antennas available for diversity reception? What am I missing here? I don't operate any of the digital modes but I would like to do so. Is the 2.8K filter adequate for digital modes or do I want something different? I also like the portability of the K3 as I am planning on some future DX-pedition use. I can't see lugging a 43 pound FTDX5000 through airport security either. Sorry for the long post but I wanted to have a sanity check with some experienced K3 users that know the K3 and have similar interests and requirements. I'm on vacation this week and one thing I do plan on doing is dropping by a local in or DX club and using his K3 for a couple of hours. Your thoughts and comments are appreciated. -- 73, Gary K9GS Check out K9NS on the web: http://www.k9ns.com Greater Milwaukee DX Association: http://www.gmdxa.org Society of Midwest Contesters: http://www.w9smc.com ************************************************ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
