> I think some of the microHAM units might do this. My MK2R+
> advertises this capability.
It depends on the purpose for connecting the K3 to CI-V bus. If
the user is trying to control an Icom compatible peripheral from
the K3, many of the microHAM interfaces (including DigiKeyer II,
microKEYER II, MK2R+ and Station Master) provide CI-V compatible
outputs. Information on those auxiliary or amplifier control
outputs (including configuration data) are available in the User
Manual.
Note the microHAM interface generates an Icom CI-V "transceive"
compatible data stream "TO" the accessory. There is no "reverse"
path and as such one can not connect an Icom transceiver to the
auxiliary CI-V jack and slave the K3 (or other supported
transceiver) to the Icom transceiver.
73,
... Joe Subich, W4TV
microHAM America, LLC.
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
On 12/28/2010 2:17 PM, Dick Dievendorff wrote:
> I think some of the microHAM units might do this. My MK2R+
> advertisesthis capability.
>
> Dick, K6KR
>
> On Dec 28, 2010, at 10:40, "Fred Serota"<[email protected]> wrote:
>
>> Is there a way, or an adapter, available to connect the K3 to the CIV bus.
>> Second choice would be a K3 serial port to USB adapter. Are there any
>> special considerations here?
>>
>> Thanks for you help,
>>
>> Fred, K3BHX
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
