I have tried DATA-A, CW, USB, in other words I have tried them all. I have tried different settings for mike input for rear line in and everything that everyone has suggested.
It just does not work. I am sure it is something simple, but I cant find it. Don KD8NNU On Fri, Dec 31, 2010 at 5:21 PM, [email protected] wrote: > Do you have the K3 set to DATA-A mode? > > James K2QI > ------Original Message------ > From: [email protected] > Sender: [email protected] > To: Elecraft Reflector > Subject: [Elecraft] K3 & DM 780 > Sent: Dec 31, 2010 16:27 > > I want to use DM 780 with my K3 to work either CW or one of the data > modes. > > I can get the DM 780 to decode signals, but if I try to TX, I am > unable to trigger the radio to do anything. > > I have both a USB to serial connection, plus the sound card from the > laptop connected. I have been reading the manual and a starter guide > someone sent me, but I am getting nowhere fast. I did try different > settings for the PPT--KEY under the config menu, and I did get a solid > tone out of the monitor speakers but no TX. > > If someone can point me to a resource on the intranet, I will glady do > some more reading. > > Thx Happy New Year > Don > KD8NNU > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > Sent via BlackBerry from T-Mobile ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
