Jetti, It would seem that you are having a multitude of strange behaviors. The usual thing to try is an EEINIT, but before doing that, try to use K3 Utility to save your parameters (or better yet, have a prior configuration save done before the problems surfaced). Try an EEINIT and restore your parameters from a known good working set if possible - if you do not have a good set of saved parameters, you may have to restore all your settings manually.
Things do not "go to hell in a handbasket" with multiple symptoms unless the data tables get scrambled, and it sounds like you have multiple problems there. 73, Don W3FPR On 12/31/2010 8:34 PM, Jettie Hill wrote: > HI SIG on readout. Blocks the RX. Sub RX seems to be OK, but things are > going worse. > > Can't access Config or Menu > No transmit output > Frequency readout reverses while tuning > Most button take 5 seconds after release > Sub RX seems to work, except no frequency display > > Any ideas?? > > Jettie B. Hill, W6RFF > Roseville, CA 95661-5008 > 916-783-0383 > American Radio Relay League (ARRL) > Since 1938. K3 #4951 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
