On Tue, Jan 4, 2011 at 5:21 AM, <[email protected]> wrote:
> I switched computers and now, just getting N1MM on screen causes the K3 to
> transmit. The K3 works as usual with N1MM off and vice versa. Phone or
> CW, VOX on or off, no matter. When N1MM and the K3 are on together, the K3
> is in transmit.
Two ways to fix this (pick one).
* In N1MM Logger, Config ->Configure Ports -> Hardware , click the
"Set" button next to the K3's COM port and change DTR and RTS to
"Always Off".
* On the K3, set CONFIG:ptt-key to "off-off"
Alternatively, you can actually use the RTS and DTR lines on the COM
port for PTT and CW keying, if you want, by configuring them to match.
~Iain / N6ML
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
