Had a wierd thing happen this afternoon. I was tuning for RTTY signals on the high end of 30 meters when all of a sudden, the P3 decided to show a different frequency than I was listening to. The filter marker was way off the screen and the displayed frequency on the P3 didn't match the K3. I was NOT in SPLIT and both the A/B VFO's were indicating the same frequency. The 400 Hz filter in FL/2 was selected and DUAL PASSBAND was ON.
Couldn't find anything in the manual and restoring the K3's configuration from one I saved several days ago had no apparent effect on what the P3 was doing - P3 at that time indicated a frequency of 000.0. Checked all connections and they were good so I recycled power on the P3 and then on the K3 to no avail. Wound up having to do a complete INIT of the K3, cycling power and THEN reloading the previously saved configuration. Everything was then back to normal, so I saved that config just in case. Not sure what happened and if it happens again, I'll try to remember exactly what was going on at the time of the anomaly. Jim Sheldon - W0EB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
