After properly performing the TX Gain calibrations, I don't
see any significant difference between tones (K3 s/n 477):
Mark Space Difference
at 100W 100.50 100.40 -0.004 dB
80W 80.70 79.50 -0.06 dB
60W 60.90 60.00 -0.06 dB
40W 40.50 39.70 -0.08 dB
20W 20.22 19.61 -0.13 dB
Measured into a known flat 50 Ohm dummy load with TelePost LP-100
watt meter. K3 is keyed in FSK, power at mark recorded and the FSK
line closed and power at Space tone recorded without opening PTT.
If PTT is opened and closed between reading power at Mark and Space,
the two power levels are identical within the resolution of the
watt meter.
73,
... Joe, W4TV
On 1/10/2011 7:07 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
> 5 pole 2.7 kHz SSB filters will also have a little more natural ripple
> than the 8 pole 2.8s.
>
> 73,
> Eric
>
>
> On 1/10/2011 3:35 PM, Wayne Burdick wrote:
>> Hi Hank,
>>
>> The difference in amplitude is due to the small amount of ripple in
>> the crystal filter. The effect on transmission bandwidth is
>> negligible, and it's also extremely unlikely to affect copy.
>> Nonetheless, we're planning to provide a way to tune out the difference.
>>
>> 73,
>> Wayne
>> N6KR
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
