In N1MM when you set the serial port for the K3 on the Configurer click the button to the right of the serial port you're using that says Set. Check off the box that says "Radio PTT via command".
73, Alan N5NA Doug VE3VS wrote: > > I have been enjoying operating my K3 for several months. One of my > interests includes RTTY. > > I use the latest MMTTY software (AFSK), have the two audio lines > connected, and use VOX to operate this mode. At the same time, the serial > cable from the computer to the radio remains connected. > > Question - Is there a set-up that will allow the computer to signal PTT > through the serial cable in order to transmit the RTTY tones, rather than > enabling the VOX switch? > > Doug, VE3VS > > -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Another-push-to-talk-question-tp5918290p5920383.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
