I used my K3 to transmit a USB/LSB on all bands except for 10m. The only two bands that I could receive a readable SSB signal was on 20m and 17m. I tried USB and LSB on all other bands and could not receive a readable signal. I used my S-Meter to adjust the frequency on the signal in which I did not have a readable signal and the peak of the signal on the K2 was about 2.2 khz below the indicated frequency on the K3. I adjusted and verified the K2 is on frequency using WWV prior to performing this test so I know both the K2 and K3 are on frequency. -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-SSB-Receive-issue-tp5925220p5925735.html Sent from the [K2] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
