Kieth, The most likely problem is that you failed to solder pin 1 of either the display itself or the resistor pack directly bellow it. Pin 1 of both are associated with the "d" segment (lowest horizontal segment) of the 7 segment display.
Pin 1 has a round pad while the rest are rectangular, so it is often overlooked. 73, Don W3FPR On 1/16/2011 2:52 PM, K Price wrote: > I have just completed the 2nd phase and am at the Alignment/Testing Phase II. > When I powered up the radio in Phase I the display appeared to function > normally and all parts of it lit up. For Phase II the bottom row of the > display no longer lights up. Otherwise, the display functions as you would > expect. I have checked for solder bridges and shorts but do not see > anything. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
