This is a copy of a message I just posted on the N1MM Logger reflector. This is not just an N1MM problem because I tried MMTTY 1.64G stand-alone program and had the same results. If anyone has any experience/helpful suggestion as to how to fix this, your input would be greatly appreciated. I did spend several hours going through my user's manual searching for help, but that was not fruitful.
Thanks and 73, Tom - W4BQF -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tommy Alderman Sent: Thursday, January 20, 2011 7:31 PM To: [email protected] Subject: [N1MM] FSK problems on K3 radio Win 7 Pro 64-bit N1MM v 11.01.01 MMTTY 1.64G K3 radio CONFIG:Hardware COM 3: Radio Control - DTR set to Always OFF - RTS set to PTT COM1: Digital checked - DTR set to Always OFF / RTS set to Always OFF EXTFSK: Set to COM 1 - FSK = TxD / PTT = DTR K3 CONFIG: PTT-KEY RTS - OFF (but I later found out it does not matter how this is set!) N1MM and MMTTY transmits the messages fine; any macro is sent correctly and while sending, I can hear the audio (dittles). The problem is that once the macro is completed and sends the command to switch to receive, the K3 does not produce any audio. I have read N1MM's documentation on the K3 and pretty well followed the section titled 'Option 2', but after about six hours I have run out of things to try. All I need is to get the K3 to return to receive mode, and I am aware of the possible "key-down" condition mentioned in the Option 2 document. Any help will be greatly appreciated. 73, Tom - W4BQF [Non-text portions of this message have been removed] ------------------------------------ To unsubscribe, send an email to: [email protected] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/N1MMLogger/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/N1MMLogger/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
