Hi Joe; As it turns out I have the exact set-up you do - an EMU 0202 USB external and a K3.
When I follow the directions for setting levels on a K3 here are the numbers I get: Soundcard Wave level in Windows XP: 22 (of 100) Line level on K3: 9-10 (of 60 This usually gives me three solid bars and two more flickering on the K3. I have wondered if having such a hot line level is hurting me at all. Ideally I would like to see the K3's line level near 30 - or half way. But when I do that the Wave level in Windows cannot be st low enough. Make me think I need some line attenuation. HTH 73 de Eric, KG6MZS -----Original Message----- From: JA STAPLES [mailto:[email protected]] Sent: Saturday, January 22, 2011 10:05 AM To: [email protected] Subject: [Elecraft] K3: PSK31 Settings I would appreciate some help with setting up the K3 for PSK. I am not clear as to what settings to use or just how to get them set. There appear to be three issues of concern.1. K3 Line-In2. Sound card output level3. KL3 ALC I have set the K3 Line-in at 15. I am using a E-MU 0202/USB external sound card. I'm not sure how to set the output level ... And so far I haven't found a way to adjust the ALC to 4 bars in the Data A mode. I must be missing a step somewhere. I've searched the various "threads" but have yet to get it all sorted out.Please reply via [email protected] ThanksJoe W5ASPJoe, W5ASP ______________________________________________________________Elecraft mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:[email protected] list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
