Yes, I have the radio in CW mode. John
-----Original Message----- From: Don Wilhelm [mailto:w3...@embarqmail.com] Sent: Tuesday, February 01, 2011 8:49 PM To: John Santillo Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] Keyboard CW with HRD and DM780 John, Have you tried setting the K3 to CW mode? DM780 sends KY commands over the RS-232 interface, and the K3 does not know how to respond to them unless it is in CW mode. 73, Don W3FPR On 2/1/2011 8:33 PM, John Santillo wrote: > OK guys I've tried everything to no avail. The DM780 demodulates CW, PSK, > etc fine and I can get the frequency readout and all the K3 button are > displayed > on DM780 but I just can't get the Keyboard CW to work. I did program > the M1-M4 memories on the K3 and was able to activate them from DM780. I > have DM780 connected to HRD via the IP server. I also have DM780 set > to CW(KY Command). I've tried VOX, Data A, PSK D and Line-In via the Menu > Button but no luck. How do I set the K3 and/or the HRD/DM780 to get > Keyboard > CW to work? > > Any suggestions would be appreciated. > > > 73, > > John > N2HMM > S/N 5033 > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
