Mike - The K3 is a software defined transceiver so needs time to boot up and to close down. You should always switch off your K3 with the Power switch on the front panel. Switching off the power at the supply would be like shutting your computer off at the supply without first closing down Windows. If the K3 power is cut, it will take time to recover when you next switch it on. That would be a risk as it might even cause some corruption of the firmware.
73 de David G4DMP In a recent message, Mike Harris <mike.har...@cwimail.fk> writes > >I think I know what causes it. I switch everything off when not in >use and it is very easy for me to switch on the PSU (switcher) and >then hit the K3 power button within 1-2 seconds. If I slow down on >powering the K3, maybe all of four to five seconds after PSU switch >on, all is OK. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
