Ed, The first two readings are very likely OK, you might re-check by reversing the leads or putting new batteries in your DMM. The other possibility is that you are using auto-ranging, and the reading may be a bit different if you switch to the first fixed range greater than 90k
I don't know how you DMM indicates an infinite reading, but you can easily check - it will be the same reading as you get with nothing connected to the leads. 73 Don W3FPR On 2/12/2011 1:19 PM, EMD wrote: > I have some questions on the results of my check. > U6 pin 29 should read between 70 and 90k, I'm reading 96k. > U6 pin 30 should read between 70 and 90k, I'm reading 97k. > U8 pin 15 and 16 should read>100k, I'm not getting a reading at all so I'm > wondering if this is the way my DMM reads infinity. > > Are these readings in the ball park or do I have some trouble some where? > > 73, Ed > KE7HGA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
