Mike, I am not Wayne, but I do not see a problem because the band data signals from the K3 come from simple TTL level drivers (they are outputs). There is nothing wrong with having multiple receivers listening to the driver output - as long as the available current from the driver (fan out) is not exceeded.
OTOH, connecting multiple drivers to one input signal will create confusion without additional gating logic. The physical connection may require a full 15 pin "Y" adapter (note that a VGA splitter will not work - all pins are not isolated and some are missing). 73, Don W3FPR On 2/15/2011 6:27 PM, Mike wrote: > Wayne - > > Can the K3 drive a band decoder (aka automagic antenna sw) and the KPA500 > simultaneously via the 15 pin connector? > > 73, Mike NF4L > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
