It has been since Fall that I have had my K3 up on 1296MHz as we have been doing major landscaping around the dish (huge rock walls) and the dish had to be disconnected. I finally got everything up and running for this evening's moon pass. The problem is the P3 shows no baseline signal and the waterfall is a blank pink screen. I can hear signals off the moon, and the P3 knows it is on 1296MHz as it is indicated on the top of the P3 display- but no spectral or waterfall regardless of the ref level. Same thing on the internal 2M transverter. Everything was working FB last Fall- of course there has been a pair of firmware upgrades since then. The P3 appears to function properly for perhaps 2 seconds then goes to no signals. CONFIG settings all appear correct to me. Any ideas?
Tnx, Dale W4OP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
