Arie Kleingeld PA3A-2 wrote: > > Bill, > > Thanks for the confirmation. > > I'm not an expert in how this software works to get the the signals > displayed on the right freq. > It seems to me that CWskimmer uses the displayed receive frequency as > data to work with. It would probably work better if it would use (by > computing using data from the K3) the VFO (1st oscillator) freq. This is > probably done by the PSDR-IF software authors. (just guessing here) >
I believe PSDR reads the offsets for each different filter and automatically corrects, although I have not used PSDR in nearly 3 years so I could be wrong. Skimmer only uses a single offset entered in the Setting Menu. The information about different filter offsets is available in the K3's output but Alex does not use it. I also wish he would lift the 24 kHz limitation for the Software on IF mode used with the K3 but so far he hasn't. I use Skimmer directly with the K3/LP-PAN (no PSDR) since I much prefer its waterfall. PSDR is nice but overly complex for what I need. 73, Bill -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-and-CW-Skimmer-tp6055781p6057110.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
