Perhaps the Rx lines in the cable aren't connecting right. It appears that when the computer sends data to the K3 the radio is receiving it, because the radio follows a bandmap click. However the computer isn't "hearing" the stuff the K3 should be sending.
I'd try another cable. Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Adriano Sent: Thursday, March 03, 2011 12:12 PM To: [email protected] Subject: [Elecraft] {K3} RS 232 Hello Due to my problem on the KUSB adapter, i tried to connect the K3 on the PC via a serial to serial cable (DB9 male to DB9 female). On the N1MM i can click on a station on the bandmap and the radio follows but when i move the dial nothing happens. Also the frequency o N1MM doesn´t move when i turn the dial. I checked the wires inside the cable and all of them looks ok. On the K3 Utility nothing happens too. Any clues pse ? The ARRL is coming and i´m desperate. TNX de PY2ADR / ZY2C Adriano Perazio ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
