Are you sure that data mode is FSK D on the lower bands?
The K3 stores the data sub-mode independently for each
band, make sure you are set for the same sub-mode (AFSK A
or FSK D) as you have configured in MMTTY.
73,
... Joe, W4TV
On 3/5/2011 9:51 PM, Axel Kaiser wrote:
>
> I am having problems with my K3 in transmitting RTTY on the lower bands (160m
> -30m).
>
> I am using MMTTY togetner with a microham microkeyerII. On the higher bands
> (20m-10m) RTTY works fine with the mode setting on Data and having selected
> FSK. But when I switch to the lower bands, the transmit LED will light,
> however there is no FSK shifting, no tones are being sent and no tones can be
> heard in the monitor either. Transmitting voice on the lower bands is
> working fine though!
>
> I checked the menu for any band dependencies but couldn't find any that would
> apply to FSK transmission. Does anyone have an idea what I am doing wrong?
>
> Axel, DL3ZH
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
