It's 'normal' Sy, unfortunately. It has been reported before but not yet fixed.
73 Gary ZL2iFB > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Sy Botan > Sent: Saturday, 12 March 2011 9:41 AM > To: [email protected] > Subject: Re: [Elecraft] K3 transmit/amplifier relay > > Most of my operating is on CW. While staying in the CW receive mode I > operate the paddle to adjust speed and monitor level. The > transmit relay > activates and the amplifier relay also is activated. Being in the CW > receive mode there is no RF output but the relay clanking is annoying. > Neither VOX or QSK is selected. I tried to find some menu > item that might > have an affect on the relay activation. Did I overlook > something or is this > normal? > > Tnx de Sy K6PWP # 5223 (one week old) > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
