Lee, If that is your only goal -- There is a built-in key that will drop you power back to some preset level - and that is the TUNE button. Set the CONFIG: TUN PWR menu parameter to the power level you want - no macro needed.
73, Don W3FPR On 3/12/2011 3:28 PM, Lee Buller wrote: > Maybe a new feature.... > > A way to step through or set power out put....say at 5 - 25 - 50 - 75 - 100. > I > do like to run barefoot as much as possible, but when the dx shows up and I > have > to tune the amp (into a dummy load) I like to be able to switch quickly to 25 > watts without cranking the knob several times to get to 25 watts. A button > that > could be programed for full or low power or steps in power. I hope I am > getting > the idea across here. > > Now I know....several guys have made T-Pads to run the full 100 watts out from > the K3 reduce the power to the amp, but that does not work for me in my set up > with my AL-82. I was just thinking if the programming could be changed or a > macro could be made to step through different power levels. > > Just an idea > > Lee - K0WA > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
