From http://www.elecraft.com/PR6/pr6.htm :
"The PR6 is a high-performance, low-noise 6-meter preamp that can be used with the Elecraft K3 and most other 6- meter capable transceivers. " If it's not accurate, I'm not the guy you need to tell... 73, Ross N4RP On 3/15/2011 4:24 PM, Wes Stewart wrote: > I suppose that is technically correct, if you use it with a 15-watt radio or > external T/R switching. > > --- On Tue, 3/15/11, Ross Primrose N4RP<[email protected]> wrote: > > >> On 3/13/2011 11:57 AM, Pierfrancesco >> Caci wrote: >>> Wes, you mail made me realize I was doing a mistake. >> The PR6 needs the >>> KXV3, so I have to rule that out on a (not enough) >> money basis. >> The PR6 does NOT need the KXV3, but can pass the >> transverter functions >> trough. The PR6 can be used with any 6M radio... >> >> 73, Ross N4RP > > -- FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.” ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
