Strangely enough, most of us wanted to expand the transmission range - especially those in Oz etc where they can transmitted way outside our limits. There is software available from Elecraft on request to do that (for MARS). 73 de M0XDF, K3 #174, P3 #108
On 17 Mar 2011, at 11:45, Thomas Horsten wrote: > Hi, > > I sent a question about this to Elecraft support, but I didn't get a > reply so let me try the community.. > > I've got a K3, serial no. 4208, and I would like to change it's band > settings so that it will match my UK licence. Currently, the "band > end" limitations are not correct for my region. > > For example, it will transmit on the section of the 80m band above > 3800 that's not allocated in the UK, and the same for 40m at 7200 and > above. > > So I'd like to change the band limitations to lock the unallocated > sections out and avoid accidentally transmitting outside the licenced > bands. For example, I sometimes hit "TUNE" and scan up and down the > band to make sure that the SWR is reasonable across the entire band, > in this mode the VFO isn't displayed, but if I hit a programmed-in > band limit it stops by itself, but this doesn't prevent me from > transmitting out-of-band at 40m and 80m for example, because the upper > limit is not correct for my location and licence. > > Is there a way to reprogram this? It seems to me it should be a simple > firmware tweak. > > Any help/pointers would be appreciated! ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
