KR9A wrote: > I KNOW THE K3 SENDS RTTY WITH YOUR CW KEYER. >
Not quite. The K3 sends RTTY from CW paddles with its own internal keyer only. It cannot send RTTY from an external CW keyer. > WHAT DO I DO TO SEND RTTY WHEN I WANT TO USE FLDIGI OR HRD AND A REGULAR > KEYBOARD \ > AND A TIGERTRONICS USB MODEM. > You connect audio cables between the modem's sound card and the K3's LINE IN and LINE OUT jacks. Your software should be set up to use the sound card in the modem. Neither the Tigertronics modem nor HRD/DM780 nor Fldigi supports FSK, so you will have to use AFSK. The K3 should be in either AFSK A or DATA A mode. The K3's MIC gain control controls the line in level in these modes. Adjust the controls so that the K3's ALC meter reads 4-5 bars on transmit. > I USED AN MFJ KEYBOARD OUT FIT AND THE DITS AND DASHES COMING OUT ON CW WERE > ALWAYS \ > INVERTED NO MATER HOW I PROGRAMED THE RADIO TIP AND RING FUNTION. AND NO RTTY > CAME \ > OUT AT ALL..... I GUESS I AM GETTING OLD. > You can't use an external CW keyboard to send RTTY with the K3. 73, Rich VE3KI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
