Installing the K3EXREF involves installing a connector/cable assembly in the REF. hole in the K3's rear panel and running the cable under the RF board to the front panel shield, then up behind the front panel shield. The other end plugs into the TMP connector on the KREF3 reference oscillator board that sticks through the hole in the shield.
A small pony board plugs into the connector on the component side of the KREF3 board, held in place by a screw that passes through it and the KREF3 board and into the PEM nut in the shield. The biggest part of the project is taking the left side off of the K3 to install the cable. If you have the K144XV installed, it needs to be removed. If you have the KRX3 subreceiver, it can be left in place. You do *NOT* need to remove the KRX3 module with all its cables. Ed's time of 1.5 hrs sounds about right for someone working carefully and methodically, doing the job for the first time. There's no soldering, of course, but still a fair bit of mechanical disassembly/reassembly. After doing it several times, I can probably do it in 30 minutes or a bit less without rushing. Ron AC7AC -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of David Pratt Sent: Saturday, March 19, 2011 3:49 PM To: Edward R. Cole Cc: [email protected] Subject: Re: [Elecraft] Installed K3EXREF That seems quite a long time to install it, Ted. What's involved? I have looked for the manual on-line but it does seem to up there yet. Any more details would be appreciated; I'd like to order one. 73 de David G4DMP In a recent message, Edward R. Cole <[email protected]> writes > >It took me about 1-1/2 hours to install the new EXREF for referencing >the TCXO to external 10-MHz. I have not installed the new firmware >or tested it yet...more news, later. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
