Hi all: I am just doing the alignment for a recently completed XV50, to be used with my K2. I am on the step that says: "Key the 28MHz rig to provide transmit RF to the transverter and advance R22 until you get a reading between 0.1 and 2 volts at TP5." I found 0 volts here, and adjusting R22 had no effect.
That's my first problem. While checking voltages found in Appendix B, I accidentally shorted pins 1 and 2 of of U4. Until that happened, I had the correct voltages. After that, I had only about 0.5v between 1 and 2 and about 1 v between 2 and 3. What have I blown, do you think? And any suggestions on the original problem also greatly appreciated. Thanks in advance. 73 de Brian W3BW _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
