Brian,

Do you have a BNC cable between the QRP antenna jack (or ANT1 of the 
KAT2) and the RF in jack of the KAT100?  That is where the RF must flow 
- RF does not flow on any of the lines in the AUX I/O cable.

73,
Don W3FPR

On 3/28/2011 8:28 AM, Brian Pepperdine wrote:
> On the weekend, I picked up  a nice K2 set - a K2 with internal tuner and 
> battery, plus the remoting of the
> KAT100 and KPA100 built into an EC2 enclosure.
>
> All set up for QRP in  field/portabl/patio or full 100 watts in the shack.
>
>
>
> But an odd thing... this all came from a very reliable ham (a techical guy of 
> long standing circa. 1957 onward) and it was
> built according to the KK7P web page guidelines, with a printout of Lyle's 
> pages on this from the web site.
>
> It does NOT hear RF signals when in the paired mode with amp/tuner connected.
> I have it set up as per the photos.. with DB9 cable between the I/O Aux jacks 
> on the PA/KAT and the base K2, and antenna attaches to ANT 1 UHF jack on the 
> PA/KAT box.
>
> I hear RF fine if I put the antenna line on the basic K2 BNC Antenna 1 jack, 
> but nothing heard in the full setup.
>
> I read the pages.. it seems the K2 is to have the tuner set at CAL from what 
> I read, but whether in CAL or in Auto.. I still get nothing heard.
>
> I am assuming the RF somehow, somewhere passes from the K2 to the PA/KAT via 
> this IO Aux line?
>
> Any ideas...?
>
> I figured it would be all ready to go.. sort of direct from his shack table 
> onto mine, but something seems amiss.
>
> tnx
> Brien
> VE3VAW
>                                       
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to