Roy, Be certain you have T-R set to HOLD. See page 89 of the manual. The T-R setting determines the delay, and the 8R hold or normal settings will influence the behavior of the 8R signal (that signal controls the K2 "keyout" timing.
At what code speeds - yes at slow speeds, the relays will "chatter" no matter what the settings, but at 20+ wpm, the relays should hold in between characters. The K2 uses silent electronic T/R switching, but the XVxxx transverters use relays for T/R functions. 73, Don w3FPR On 4/2/2011 1:11 AM, Leroy Marion wrote: > I just finished a XV50 transverter. Using it with a K2 > > with the KI02 control. > > It seems to work OK when keyed for SSB. When I use > > CW, its relays click and chatter like mad. Do I have > > some thing set wrong? > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
