Thanks for the clarification, Jack! -Bruce, N1RX -----Original Message----- From: Jack Brindle [mailto:[email protected]] Sent: Sunday, April 03, 2011 8:03 PM To: Bruce Beford Cc: [email protected] Subject: Re: [Elecraft] K3, P3 & KPA500
No, it is more than that. We have implemented a command set for the KPA that will allow you to monitor and control its operation. This is very important for users who wish to use the KPA500 remotely. The K3 Utility will make very good use of these commands to show what the KPA500 is doing and allow you to control it. Of course the command set will be published so others can implement KPA500 control features in their programs. You are correct that the KPA and K3 communicate through the Aux signals. We also have interfaces for transceivers from other manufacturers, and the option to allow the KPA500 to determine the proper band as well. This latter works incredibly well, detecting a new band and switching in well less than a dit time. The KPA500 is definitely worth waiting for. But the wait should soon be over... Jack B, W6FB On Apr 3, 2011, at 4:34 PM, Bruce Beford wrote: > I believe this PC connection is only for firmware updates for the KPA-500. > the "operational link" between the K3 and KPA-500 is via the ACC connector. > Correct? -Bruce, N1RX > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
