Does that happen with the "bare" K3, or is there a computer control application involved to further "muddy the waters".
If it happens with nothing connected to the K3 except a mic, key, power and antenna, then I would suggest that you contact [email protected]. If there are other devices involved, then eliminate them one by one to see if the problem is resolved with the deletion of that device. 73, Don W3FPR On 4/5/2011 8:08 PM, W4CCS wrote: > Recently I have been experiencing a problem with the AGC on my K3 > (2090). When I return to receive from transmit, the AGC is turned off > and the speaker system is overloaded. This happens on about every 10 to > 15 transmissions. It has happened with the K3 sitting on the desk in > receive.. This is very annoying and very hard on the ears..!! > > I'm running firmware versions: > > MCU: 04.25 > > DSP1&2: 2.71 > > de W4CCS > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
