From: Wes Stewart <[email protected]> "The LP-Pan works well with a decent soundcard, but suffers from the use of PowerSDR software, which is simply awful in my opinion, and lots of cabling."
Spectravue runs with the LP-Pan just fine. I am using the recommended emu-0202 soundcard with a single LP-Pan. The emu connects with a USB and requires two audio cables to the LP-Pan. The LP-Pan uses a BNC coax cable to the K3 IF. One one more connector for 12v. That is more than the coax plus USB cable for the SDR-IQ, but I do not see what the big deal is. But then if you saw the wiring in my shack you would understand that comment. For dual-receive I use the M-Audio Delta-44 soundcard which has four audio cables and a sub-D15 cable to the computer. But this is not a standard application. 73, Ed - KL7UW, WD2XSH/45 ====================================== BP40IQ 500 KHz - 10-GHz www.kl7uw.com EME: 144-1.4kw, 432-100w, 1296-testing*, 3400-winter? DUBUS Magazine USA Rep [email protected] ====================================== ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
