Hi, Why the negative reaction to this suggestion? I think it would be really useful if I could operate the K3/KPA500 combo as if it was a single transmitter with power settings from (whatever the lower K3 power is) to the full 500W and turn the KPA-500 on and off accordingly. The real context is what do I have to do to quickly switch from 100W to 500W when I realize I am not going to break through the pileup. Without this feature I would have to
1) switch the KPA-500 from standby to active 2) dial back the K3 power to whatever is appropriate for this band I am sure this can be done with a macro, but having this built in would be more than "nifty". Knut David Gilbert wrote: > > Aside from it possibly being "nifty", in what real world context would > you find that to be useful? > > 73, > Dave AB7E > > > > On 4/7/2011 1:55 PM, Toby Deinhardt wrote: >> Hi Wayne& the list, >> >> not sure if this has been suggested before, but it would be really nifty >> if when using a KPA-500 together with a K3/100 the power would be >> continuously be adjustable from milliwatts up to 500 W. > > -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA-500-K3-firmware-suggestion-tp6251532p6251772.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
