I assume this is a K2/10 with the KAT2. It is unusual for the diodes in the KAT2 wattmeter to be damaged by a static surge, but it can happen. I would first check D1 and D2 in the KAT2. If they check good with an ohmmeter (normal diode check), then the wattmeter in the KAT2 just needs to be balanced and properly calibrated. You will need an external wattmeter to do the calibration.
The K2 uses the wattmeter output to control the power output, so if the wattmeter is not correct, the K2 microprocessor will not have the correct information and thus will control the power at the wrong level. 73, Don W3FPR On 4/14/2011 10:30 AM, JAMES DAVIDSON wrote: > just got a used k2 with the atu in it !! sure is a promlem for me i set my > power at 5 watts. even into the dummy load it shows 9.9 for some odd reason . > my > other rigs have internal atus and work fine have you heard of any one else > having this prob.?. jim kc0dd thanks > > > > little radios big radios > > 1000s $ of radios all set at QRP > > am i doing this rite hi! kc0dd > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
