Hi Ken I'm sorry. I meant 4800. And the HRD does match. Also- am using Windows XP, with a computer that successfully used HRD with a different radio. But this time I installed the newest build of HRD. Thanks and 73 Steve WA2DTW
________________________________ From: Ken Wagner K3IU <kenk...@cox.net> To: Stephen Victor <victo...@yahoo.com> Sent: Mon, April 18, 2011 12:47:56 PM Subject: Re: [Elecraft] K2: CAT control of K2/100 with HRD Hi Steve: I think you have the baud rate wrong. The K2 is 4800, (not 48,000) if I remember correctly, and HRD must match. 73, Ken K3IU K2 #5413 On 4/18/2011 12:14 PM, Stephen Victor wrote: Hi My K2/100 has been functioning well, and I am now trying for the first time to use the connection on the 100W amplifier unit for CAT control with Ham Radio Deluxe. The K2 is serial number 6679, so apparently no modifications are needed. The side-tone works. I fashioned the cable as per instructions (and there is continuity where there should be), turned on the "port" function on the K2, set the baud rate on HRD to 48,000. However, the HRD is unable to read the frequency. Am I missing something obvious? Is some driver needed, or some further modification to the K2 or amplifier circuitry? Thanks and 73 Steve WA2DTW ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html