George, Check the menu - Scroll to either the "b30" or "b80" (you will only see one or the other), if it is "b30" tap the rightmost button to change to "b30". Then HOLD the Edit button. If the parameter is "off", turn the VFO knob to "On" and tap the MENU button twice to exit. You should now have all 4 bands.
That information is in the KXB3080 manual. 73, Don W3FPR On 4/19/2011 2:03 AM, JONES, George wrote: > I have had this KX1 for a while. This fault was noted (maybe arose) > during a recent garden op. session. > Bands 7/10/20 are all operational& selectable as normal, but 3.5 is skipped > completely. > > I acquired this little gem ready built& fully working, so am a bit wary of > taking it apart. > Before I do, I am wondering if there are any stock faults to look out for ? > > 73 > > George G4TPV > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
