Dick, And put your shoes back on...:-) Gary
On 21 April 2011 12:14, Dick Dievendorff <[email protected]> wrote: > Thank you! My contribution (the XG3 Utility) is just a part of a much > larger > Elecraft team effort that brought us the new goodie. I bought one for > myself at Visalia. Up to now I've been using a naked printed circuit board > with some wires hanging off it. Now I can figure out what the buttons and > lights are without counting! > > 73 de Dick, K6KR > > > -----Original Message----- > From: Bill (K9YEQ) [mailto:[email protected]] > Sent: Wednesday, April 20, 2011 7:06 PM > To: 'Dick Dievendorff' > Cc: Elecraft > Subject: RE: [Elecraft] Another thought for the XG3 Utility > > Dick, > > I have mine. Just unplugged the W2 serial cable and voila! How sweet the > new toy is!! Nice job!!! > > 73, > Bill > K9YEQ > > > -----Original Message----- > > We were showing this on a P3 at the Visalia DX Convention last weekend. > > There are two "programmable functions" (sweeps) described on page 10 of the > XG3 Owner's Manual. The XG3 Utility supports their setup. > > You choose the start, end, and step size frequencies with a resolution of 1 > Hz, the time interval between steps (1 to 64K msec), and a check box that > indicates whether the sweep should be repeated. > > Once the sweep settings are sent to the XG3, you can disconnect the PC > program and initiate the sweep by HOLDing the band up/down buttons (HOLD is > PF1 and PF2). Tap any button to stop the sweep. Or you can leave the PC > program connected and click the Sweep 1 or Sweep 2 buttons on the Operate > page of the XG3 Utility. > > See "Edit Sweep Memories" on the Configuration tab of the XG3 Utility. You > can install the XG3 Utility and peruse Help even if your XG3 hasn't yet > arrived. I have a fair number of screen shot images of the various dialogs > in Help. > > There's a link to install the XG3 Utility at the bottom of this web page: > http://www.elecraft.com/XG3/xg3.htm > > 73 de Dick, K6KR > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- VK4FD - Motorhome Mobile Elecraft Equipment K3 #679, KPA-500 #018 Living the dream!!! ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
