Ron, no, it happens even when I move from 147.030 to 147.060. I even stored the same freq in VFO B to be sure that didn't have something to do with it. But I get the little click each time I rotate the vfo A knob from one 2m mem to the next. Just to emphasize, this is not when I'm tuning but when I'm cycling through memories in the M>V mode.
73, Mike ab3ap On 04/24/11 17:16, Ron D'Eau Claire wrote: > Mike, It sounds like you have memories set up on both sides of 146 MHz. > > There is a relay that clicks when you shift L.O. frequency range from > 144-146 and 146-148 MHz in the K144XV. > > Try tuning across 146 MHz with your VFO and see if you hear the same click. > If so that would be it, but it should not click when changing frequencies > within either the 144-146 or 146-148 ranges. > > Ron AC7AC > > > > -----Original Message----- > > When I use M>V and the vfo A knob to cycle through 2m memories I hear a > relay click each time I move to a new 2m memory, even before hitting M>V > to exit that mode. Is this expected? It doesn't seem necessary. > > Thanks! > Mike ab3ap > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
