Yes, although the RS-232 commands are not implemented at this time. So you can see the spectrum/waterfall just fine and most P3 functions work but it does not read out the K2 frequency, and functions like clidk-to-QSY are not implemented.
And of course you have to add an IF output connector to the K2. Something like this: http://www.cliftonlaboratories.com/k2_interface.htm Alan N1AL On Sat, 2011-04-23 at 11:58 -0400, Tom McCulloch wrote: > I apologize if this has been asked before (and it most likely has been) > -- Can the P3 be used with the K2 (barefoot)? > > tnx de > Tom > WB2QGD > K2 #1103 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
