Can we see some pictures of your setup? Henk PA5KT
Op 11-05-2011 4:14, Dick Dievendorff schreef: > Just for operational convenience I'd consider stacking them the other way, > with the K3 VFO A knob at a convenient height for tuning and the amplifier > above the K3. > > I've found some very handy open-shelving bamboo "shoe racks" at CostCo that > are doing the job for me. My amplifier is about 2 inches above the K3. The > rack is wide enough for a K3, P3, and another box such as a rotator > controller or a US Interface Navigator. The 2nd shelf hosts a second K3 and > a KPA500. The top shelf has two speakers and various junk that I gather. > > I've found these racks so useful that I have 5 or 6 of them. I can hold QSL > boxes on them and some plastic shoe boxes that hold various projects. I > have a lot of little projects and boxes. > > Dick, K6KR > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of ai6ii > Sent: Tuesday, May 10, 2011 6:59 PM > To: [email protected] > Subject: [Elecraft] KPA500 - stacking possibilites > > Now that I have received confirmation of the delivery, I need finalize where > I am going to place my new KPA500. Given a very limited desk size (ony 34 > inches wide), I wonder if the K3 can be stacked on top of the KPA500. I > undertand from earlier posts that there needs to be a minimum half inch > clearance on top of the KPA500 for the air intake grill. Has any FTer > stacked the two boxes to see if they work without generating too much heat? > > ..mike AI6II > ______________________________________________________________ -- Henk Remijn PA5KT email: [email protected] www: www.pa5kt.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
