Dear All, I am confused after having tried almost anything to get my PC to control both K3 and the Expert. I can controle K3 from HRD via COM1 with no problems.
My latest try to control the Expert was to have the factory make a cable to me with DB-9 female from the computer and a DB-9 male going to the K3 and a DB-15 male going to the Expert. So the cables should be all right from the factory. My Expert is set to CAT = Kenwood and BAUD RATE 9600. My COM1 is set to Bits per second = 9600, Data bits = 8, Parity = None, Stop bits = 1 and Flow control = None. For flow control I have tried also Hardware and Xon/Xoff Result: K3 is following HRD fine. The Expert is doing nothing. What am I doing wrong? (Now that the cable must be OK as it is made by the Italian factory). Vy 73 de OZ1CCM Kel ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
