Jim, I have one of these although it's not part of my station and I've pretty much (thankfully) forgotten the tribulations of getting it configured.
I believe the latest firmware on the website is v1.5. I have v 1.6 sent to me as a text file. As I recall it fixed something or the other that was a bug in the earlier version. As you say, it would take an exceptionally loving mother to love this. If you want this file, I'll sent it via email for you to try. No warranty expressed or implied. Wes --- On Sun, 5/22/11, Jim Brown <[email protected]> wrote: > From: Jim Brown <[email protected]> > Subject: [Elecraft] KRC2 Setup > To: "Reflector Elecraft" <[email protected]> > Date: Sunday, May 22, 2011, 12:48 PM > I've been loaned a W3NQN bandpass > filter setup that uses an Array > Solutions FM6 switch box controlled by a KRC2 connected to > the Aux Bus > of my K3. Everything seems to work fine on 160-10M, with > those bands for > which there are no filters being bypassed, but 6M doesn't > get through > the switching network. There's a KRC2 config utility > that I've > downloaded and installed, and it fails to show any options > for 6M other > than for analog voltage band-decoding. It does tell > me that I have the > latest version of the KRC2 firmware installed. > > Documentation on using the KRC2 and the config utility is > something that > only the programmer's mother could love. It refers to maps, > but doesn't > tell me how to set up those maps to cover 6M. Can anyone > help me get > this running by some means other than adding switches to > bypass the > switching matrix entirely? > > Thanks and 73, Jim K9YC > _____________________________ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
