I have the five 60 meter channels set up in memory channels 10 through 14 with the asterisks so these channels truncate while tuning in either VFO or memory mode. VFO B shows 5150 Khz on all five of these channels. I did not program this frequency in VFO B for these channels. My other K3 shows the previous VFO A frequency in VFO B. It seems that VFO B can be any frequency and won't cause a problem. Are these strange frequencies in VFO B normal for these 60 meter channels? Sometimes when I change bands in memory mode and switch to VFO mode AGC goes from slow to fast. If I change it back to AGC-S, it may remain in slow mode, but if I change bands it may go to AGC-F. AGC on all bands has been set to AGC-S with V>M. Am I overlooking something or doing something wrong? Thanks. Roy W4WFB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
