David, On some XV transceivers, the "COR" is too sensitive, and in some cases I have been able to attribute it to RF getting back into the microprocessor on the front panel board.
Try putting a bypass capacitor (.001 uF) between the collector and emitter of Front Panel Q7 and see if that cures it. 73, Don W3FPR On 5/22/2011 11:41 PM, David Heinsohn wrote: > I have a problem, though I think it's minor, but irritating. > > I have both of the above transverters. They are plugged into the K2 per > the manual with the K60XV. I was experiencing IF Overload as described > on page 17 of the Owners manual, all LEDs flashing, when sending CW. I > changed JP1 to the 200 ms second delay which helped but did not fully > solve the problem. Any ideas whats causing this? Oh, my logging > program reads the K2 for various inputs on the same cable as the xverter > cable. > > Thanks for the inputs, > I want a KX3 for KB4WYR!! > > David > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.1375 / Virus Database: 1509/3654 - Release Date: 05/22/11 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
