Hello all, I have searched through nabble and found some similar posts but no definitive answer as to whether my current goal is possible:
K3 using SDR-IQ in IF mode with CW Skimmer The above scenario functions but the CW Skimmer spots have a display frequency of the IF and not the K3's actual frequency. I have configured Skimmer's Omni-Rig for the K3. When I start up Skimmer I can see that Skimmer opens up the CAT port but the frequencies displayed in Skimmer are either relative (+/- 20 kHz) or if I enter 8.215 MHz as the Skimmer frequencies then the spots have an "absolute" frequency +/- 20 kHz of the IF. I really want to see the frequency of the actual spot! I am using CW Skimmer in SDR-IQ mode. I have LP-PAN working with Skimmer in Softrock-IF mode but the 24 kHz bandwidth limitation is frustrating. Has anyone got the SDR-IQ to work in IF mode with the K3 and CW Skimmer? Alternatively any other way to achieve what I am after - K3-IF mode skimming with a bandwidth of 96 kHz or higher? Thank you for any assistance with my goal. 73 de Rich, G4ZFE ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
