I just tested this on my K3. When I have the ATU in on 6 meters, tapping ATU TUNE tunes the antenna, and 1.0-1 is displayed at the end.
I can also set LC SET mode, exit the menu, and tap ATU TUNE, which shows L and C. I can then adjust L and C using VFO A and B. After an adjustment, TUNE shows the effect of L/C changes on SWR as expected. Don't forget that ATU in/out is stored per-antenna, so you can have it engaged for one antenna but bypassed for the other. There may have been a bug in this prior to revision 4.33 -- I have to check my notes on that. Are you doing it differently from the above? 73, Wayne N6KR On May 29, 2011, at 4:57 PM, Jim Sheldon wrote: > I did forget to mention that I have done the dummy load test and the > problem persists, at least on 6 and 160 meters on the dummy. I > haven't had time to rigorously test the other bands, but I do > suspect there's an anomaly in the tuning algorithm that allows this > to crop up. I had mentioned the 160 meter problem a while back in a > post to the reflector, but never got a response. It was just before > Dayton and I expect it probably got lost in the shuffle as they were > getting ready for the show. > > Jim - W0EB > >> Hi Jim, >> Thanks for your input on the subject. Maybe the technical folks at >> Elecraft >> can determine a fix for this problem. Hope that the 'Magic Band' is >> as good as >> last year. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
