Hi all, I'm hoping someone has come across this problem and can help out.
I recently got an XG3, so thought I would run the Calibrate RF gain utility in K3 Utility. I'm running the latest K3 firmware and the most recent update of the K3 utility: 1.4.4.25 K3 and computer are communicating fine and Calibrate Tx gain routine in K3 Utility runs fine. Tried to run the Calibrate RF gain routine and I get the following error in the K3 utility window "No reponse to DSP command" and the calibration progresses no further. On the K3 LCD there is this error message: "E 040FA6. ERR DSE" I've checked and all the setup parameters for the Calibrate RF gain routine are set correctly according the the on-screen prompts. What am I doing wrong? Thanks for any advice, John VK7JB -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Calibrate-RF-gain-with-K3-utility-error-messages-help-tp6418790p6418790.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
